- ISSN(Print) : 2278-3512
- ISSN(Online) : 2278-3520
- Impact Factor(JCC) : 3.2093
- NAAS Rating : ---
- IBI Factor : ---
|These instructions are only a guide. Consistency and correct type area margins (see below) are the most important aspects in your manuscript preparation. All portions of the manuscript must be typed 1.5 lines spaced and all pages numbered starting from the title page.|
|1. TEXT AND TYPE AREA (Margins)|
|This one basic requirement must be adhered to:
Type area on a page is standard Letter( 8.5'' x 11''). All text should be fully justified. Margins for this type area: top 1.2'', bottom 0.6'' left 0.8'', right 0.6''
|2. TITLES FORMAT|
Title page is generally a separate page and comes before the text of the manuscript. It should include following details in the given format & sequence:
|Your chapter should begin with a brief Abstract and keywords.
Paper Title, Autor Names/Affiliations, Abstract and Kerywords should be in single column format followed by the rest of the paper in Single column format. Total number of authors allowed per paper is 4.
|Text type should be 10 point Times Roman. Text should be 1.5 lines spaced. First line of all paragraphs should be indented and there should be one line gap between consecutive paragraphs. Maximum number of pages should not exceed 10 pages.|
|4. HEADS / SUB HEADS|
|Levels of subheads should be easily distinguishable from each other with the use of numbers. There should be one line spaces before each subhead and one line space after each subhead.|
|Examples of Subhead Style:
l. FIRST LEVEL HEAD
(11 point bold, upper case, numbered )
1.1. Second Level Subhead
(10 point bold, first letter capital case, numbered)
1.1.1. Third level subhead
(10 point bold, lower case, flush left)
|Use FIRST LEVEL SUBHEAD for section headings.|
|5. ORDER OF THE CONTENT
The order of the content must be as per following sequence;
1. Title Page with Authors details (Including emails and affiliations)
2. Abstract & Keywords
4. Methods, if applicable / any
5. Results, if applicable / any
7.Acknowledgements, if applicable / any
9. Appendices (if applicable / any)
|The Title should be a brief phrase describing the contents of the paper. The Title Page should include the authors' full names and affiliations, the name of the corresponding author along with phone, fax and e-mail information. Present addresses of authors should appear as a footnote.|
|The Abstract should be informative and completely self-explanatory, briefly present the topic, state the scope of the experiments, indicate significant data, and point out major findings and conclusions. The abstract should be 100 to 200 words in length. Complete sentences, active verbs, and the third person should be used, and the abstract should be written in the past tense. Standard nomenclature should be used and abbreviations should be avoided. No literature should be cited.|
|8. FIGURES (Line Art Drawings) AND TABLES|
Figures and tables may appear printed directly in the text and should be black and white or grayscale. Figure should appear soon after the citation in the text or if it is too large at the end of the manuscript.
Legends/Captions for figures
Text type should be 9 point Times Roman italic (eg; Figure 1. Caption). A caption should be provided for each figure. The legend should be typed into the manuscript, directly beneath the figure. Begin each legend with a title and include sufficient description so that the figure is understandable without reading the text of the manuscript. Information given in legends should not be repeated in the text. Legends are to be listed in numerical order, labeled as “Figure 1”, “Figure 2”, etc.
Indent tables slightly from the left margin, if it is necessary to use the full width of the page. Tables should be kept to a minimum and be designed to be as simple as possible. Tables are to be typed double-spaced throughout, including headings and footnotes. Each table should be on a separate page, numbered consecutively in Arabic numerals and supplied with a heading and a legend. The same data should not be presented in both table and graph forms or repeated in the text.
Titles/Captions for tables
The table caption should be typed to the width of the table itself and typed above the table. Text type of table caption should be 9 point Times Roman italic (e.g., Table 1.Caption). Number the titles of the tables consecutively in the order of their first citation in the text. Be sure that each table caption is headed as “Table 1”, “Table 2”, etc. within each chapter.
Both figures and tables must be cited in the text.
|Results should be presented with clarity and precision. The results should be written in the past tense when describing findings in the author(s)'s experiments. Previously published findings should be written in the present tense. Results should be explained, but largely without referring to the literature. Discussion, speculation and detailed interpretation of data should not be included in the results but should be put into the discussion section.|
|The Discussion should interpret the findings in view of the results obtained in this and in past studies on this topic. State the conclusions in a few sentences at the end of the paper. The Results and Discussion sections can include subheadings, and when appropriate, both sections can be combined.|
|References text type should be 9 point (Times Roman). In the text, a reference identified by means of an author‘s name should be followed by the date of the reference in parentheses. When there are more than two authors, only the first author‘s name should be mentioned, followed by ’et al‘. In the event that an author cited has had two or more works published during the same year, the reference, both in the text and in the reference list, should be identified by a lower case letter like ’a‘ and ’b‘ after the date to distinguish the works.
All references should be in Roman scripts.
References must be according to APA style guidelines
For Book :
I. Alan Bryman & Emma Bell. (2007). Business Research Methods. New York : Oxford University Press
For PhD Thesis:
II. Mcdonalds, A. (1991). Practical dissertation title (Unpublished doctoral thesis). University of Florida, Gainesville, FL.
Article in a Journal:
III. Rottweiler, F. T., & Beauchemin, J. L. (1987). Detroit and Narnia: Two foes on the brink of destruction. Canadian/American Studies Journal, 54, 66–146
IV. McDonald, C., & Chenoweth, L. (2009). Leadership: A crucial ingredient in unstable times. Social Work & Society, 7. Retrieved from http://www.socwork.net/2009/1/articles/mcdonaldchenoweth
Plagiarism:Plagiarism is defined as the unacknowledged use of the work of others as if this were your own original work. It also includes self plagiarism, the manuscript content should not be submitted/stored in any URL/Database/Website before submitting to us for publication.
Examples of plagiarism:
Copying and pasting from the Internet and posting somewhere else without proper citation
Mentioning your name on another person’s essay or project
Copying exact wording - varbatim - from another individual’s work / text
Using another person’s tables, diagram,sounds,photo or ideas without proper references / citations
Purchasing another person’s text and using it as your own
By submitting paper for publication to the journal, Scholar (s) / Author(s) certify that :
I/We know that plagiarism is the use of another person’s idea or published work and to pretend that it is one’s own.
I/We are fully aware that plagiarism is wrong
I/ We declare that each contribution to your project from the work(s) of other peoples published works or unpublished sources have been acknowledged and source of
information have been referenced.
I/We certify that you are solely responsible for any incomplete reference that may remain in my/our work.
I have read and understood the rules on plagiarism. I hereby declare that this piece of written work is the result of my own independent scholarly work,
and that in all cases material from the work of others is acknowledged, and quotations and paraphrases are clearly indicated.
No material other than that listed has been used. This written work has not previously yet been published.
Publication in 3rd party / collaborative journals :
A soft copy and the URL are provided for articles published in 3rd party/collaborative journals, certificate is not provided for collaborative journals.
After sending the article to us, the Author may not publish his/her contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially.
When the author is sending the article to us, the Author(s) promise that the article is original work, has not previously been published, and is not currently under consideration by another publication.
The Author warrants that his/her contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or proprietary right of others.
Note 1: As a publisher, we are responsible for the process of publication ONLY.
Note 2: Indexing totally depends on content, indexing partner guidelines and their indexing procedures. This is the reason sometimes indexing happens immediately and sometimes it takes time. The whole process for including any article (s) in the Scopus database is done by Scopus team only. Journal or Publication House doesn't have any involvement in the decision whether to accept or reject a paper for the Scopus database and cannot influence the processing time of paper. Post-publication and indexing process, if for any reasons or extraneous circumstances or due to any conflicts between journal publisher and indexing agency or due to any non-adherence of ethical standards, if the indexing is removed from the server by the indexing agent (Scopus, Thomson Reuters, etc., ) we cannot be held responsible/accountable for the same.
Note 3: All SCOPUS/WOS journals does not provide certificates
Note 7: When the author is sending the article to us, the Author(s) promise that the article is an original work, has not previously been published, and is not currently under consideration by another publication.
Note 8: The Author warrants that his/her contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or proprietary right of others.
Terms and Conditions for Writing Services:
Any action or other judicial proceeding for the enforcement of this agreement or any of its provisions shall be instituted in the courts/ consumer forum & any other legal forums of competent jurisdiction of Tamil Nadu .
Any questions or concerns about these Terms and Conditions of use should be brought to our attention by email to email@example.com and providing us with information relating to your concern.
“We”, “Us”, “Our”, “www.tjprc.org” shall mean Transstellar Journal Publications and Research Consultancy Private Limited (TJPRC Pvt. Ltd.) , a company incorporated under The Companies Act, 1956 by ROC, Chennai.
“Terms”, “Terms and conditions”, “Policy”, “T&C” shall mean the entire Agreement and all parallel policies that you agree to in mutual agreement by using our website and subject materials.
“Website” refers to “www.tjprc.org” which is the domain owned by Transstellar Journal Publications and Research Consultancy Private Limited (TJPRC Pvt. Ltd.).
“Content” refers to any texts, images, graphics, videos, audios, or any other form of data which are available in our website -"
“Third Party” refers to any person or any Organization or Publishers or Vendors other than the “User” or the “Website”
General Terms and Conditions:
Your use of the Website and services and tools are governed by these terms and conditions as applicable to the Website including the applicable policies which are incorporated herein.
We completely research on every topic that we are assigned to and we are not involved in selling any ready-made research work. We educate the client / user at every stage (if inquired by the client / user, at separate cost) and the research work that we are committing is to be used as a reference and not to be submitted as it is.
Through this website or our email communications, you may be re-directed to other websites/ email communications that belong to vendors, publishers etc., for various purposes and links. tjprc.org shall not be liable for any of such websites/email communications and their related links. It shall be your responsibility to visit those websites / hyperlinks and acquaint yourself with the authenticity, terms and conditions of them. www.tjprc.org shall not be liable for any of the mistakes / errors committed by the third party vendors, publishers’ websites.No judgment or warranty is made with respect to such other services or sites and www.tjprc.org takes no responsibility for such other sites or services. A link to another site or service is not an endorsement of that site or service.
Payments will be received thru Internet Banking services which are safe. Since your purchase is a digital service / product, it is deemed “used” after download / opening and all purchases made on www.tjprc.org are non refundable. Since the products made available here are intangible, there is a strict “No Refund” policy.
Other situations which we encounter are as given below:
I WISH TO CANCEL MY ORDER
Upto 90% of the order value
Although we intend to give a 100% refund for the order, we incur costs for the payment gateway and accounts when we return the money to you and hence the 10%.
Upto 50% of the order value
A Writer gets allocated the next day after confirmation and hence a 50% amount reduction is done.
Further, this refund is subject to a genuine reason for cancellation of the order. In case of no reason provided, no refunds will be effected. For urgent orders like above there will be no refunds.
After 3 days from the date of confirmation, No refunds shall be entertained at this stage.
I PAID MORE THAN THE AMOUNT DUE
No writer was found
However no refunds shall be entertained.
I did not pass my coursework
General Disclaimers for Research Writing Services:
· Researcher (PhD Student, Scholar, Faculty or Entrepreneur) and Company/Organization refers Client as any or all the above said terms who confirm their project with us.
· Project means the writing/editing/analytical work/illustrative tasks/ Research work / Review work / Case studies, that are committed between client and PhD Research Guide.
· Conference call arrangement will be done only between 10am - 6pm (Indian Standard Time -IST) on weekdays (Monday to Friday) based on expert’s availability.
· During the conference call, the project coordinator who has been with your project will mediate your call.
· No details related to personal/payment should be discussed, on account of which the call will be immediately disconnected. This call is pertaining to the collection / elucidation of requirements and artefacts from the client.
· After a conference call, an email will be sent to the client stating the details which is understood / conveyed by the expert over the phone. This has to be confirmed by the client/researcher without which the conference call details will not be considered as a valid point for future reference
· We are unable to arrange for the conference call for Topic Selection, PowerPoint Presentation, Editing, Plagiarism correction, Formatting and referencing, Manuscript/Conference paper
· Research Proposal/Assignments/Coursework/Case studies 15-20 minutes (for the entire project)
· Masters research work / PhD research work 20-30 minutes (for the entire project)
· Projects on Individual chapters 10 minutes (for the entire project)
· The timeline mentioned above is to inform the client/researcher that the experts can be made available on request and within the stipulated timeline, the conference call is expected to complete. Further if any requests made from the researcher/client for conference call / Direct meeting, there is an additional payment applies.
· Every project is committed between the client/Researcher and Project Research Guide of our company and not with Third party who may include, but not limited to, the clients' university / guide / supervisor / department / Journal publishers and their representatives. So any revision request from client end within the specified time will be addressed as per the commitment. Once the project is completed, any changes/comments/feedback in the requirement will be considered as a new requirement
· Once the project files are dispatched, we will be awaiting for feedback/comments (if any) from the client/researcher up to Seven (7) days. On the eighth (8th) day, the client/researcher will be requested formally to get back to us for any minor modifications. Any major modifications will be considered as a new/additional request from this eighth day. After the timeline mentioned above, the client will be informed about the formal closure of the project from the team.
· However, PhD Research Guide of our company will not be able to take the responsibility in addressing your supervisor / guide / department / reviewer comments after the timeline is committed.
· For Assignment/Research Proposal/Course work: From the date of dispatch, we are open to unlimited revisions up to 7 days.
· For Masters Dissertation: 15 days from the dates of final file dispatch unlimited revisions for Masters up to 15 days and 30 days for Ph.D.
· After the respective time durations mentioned above, any project will be considered as officially closed and any modifications irrespective of whether minor or major revisions will be considered as new requirement for which the following payment pattern applies.
· We are committed towards providing a plagiarism-free work and not a free plagiarism report. However, if plagiarism report is required, you can make an additional payment for the same
· Whenever committing a project, you must let us know the format/version of the file which you require since every document that is dispatched will be only in Microsoft office (2007) version or relevant software formats.
· We are not responsible to provide any software / screenshot of the software used since it is purely used for our internal purpose. The committed works will be provided with complete information in write-up