Editorial Board - International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)
  • ISSN(Print) : 2249-6890
  • ISSN(Online) : 2249-8001
  • Impact Factor(JCC) : 8.8746
  • NAAS Rating : 3.11
  • IBI Factor : 3.2
Editorial Chair Person

Prof. Majid Ghassemi, M.S., Ph.D., Chancellor ,K. N. Toosi University of Technology ,470 Mirdamad Ave. West ,19697, Tehran, I.R. of Iran

Executive Editorial Board Members

Dr. SATHISH.T, Dean, Research and Development, Vesta Research Institute, Aranthangi, Tamilnadu,India

Dr.Woon-HongYeo, M.S.,Ph.D.,(UniversityofWashington), Postdoctoral Research Associate, Rogers Research Group, Materials Science and Engineering, University of Illinois at Urbana-Champaign, Illinois,USA

Prof. Dr. Darshak Desai, B.E., M.Tech., Ph.D., Professor &Head Department of Mechanical Engineering, G H Patel College of Engineering & Technology (GCET),Bakrol Road, Vallabh Vidyanagar, Anand, Gujarat,India

Prof. Dr. B.Venkataraman, M.E., Ph.D., Principal, St. Joseph College of Engineering, Beemanthangal, Sriperumpudur, Kanchipuram,India

Dr. Ashok Kumar Sharma, Professor, Mechanical Engineering, Manipal University Jaipur,India

Prof. Galal Ali Hassaan, B.Sc. (Cairo University), M.Sc. (Cairo University), Ph.D. (Bradford University), Professor (Cairo University), MASME, MAMSE, , Emeritus Professor, Department of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza, Egypt,Egypt

Dr. Ramachandra C G , B.E., M.Tech., Ph.D.,, Professor and HOD for Mechanical Engineering (II Shift) & Marine Engineering in Srinivas Institute of Technology, Mangalore,India

Dr. Sugato Ghosh, M.E., M.B.A., Ph.D., Assistant Professor in Mechanical Department Calcutta institute Technology, West Bengal,India

Editorial Board Members

Dr. Dong W. Jung, PhD, PEng, FCSME, Professor in School of Mechanical Engineering, Jeju National University, Jeju-do, South Korea

Dr. Giuseppe Verde, Student, Department of Engineering, Parthenope University of Naples, Italy

Dr. RAMACHANDRA C. G, Associate Professor, Mechanical Engineering, School of Engineering, Presidency University, Bengaluru, Karnataka, India

Dr. RAVISH KUMAR SRIVASTAVA, Professor & Head, Department of Mechanical Engineering, Subharti College of Engineering and Technology, SWAMI VIVEKANAND SUBHARTI UNIVERSITY, Meerut, Uttar Pradesh, India

Dr. Dhinesh Balasubramanian, Ph.D., Assistant Professor, Department of Mechanical Engineering, Mepco Schlenk Engineering College, Sivakasi, Virudhunagar, Tamil Nadu, India

Dr.S.Mohanamurugan, Ph.D., Professor, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, OMR, Chennai, Tamil Nadu, India

Dr. Deepika Garg, Ph.D., Assistant Professor, School of Engineering G D GOENKA UNIVERSITY, From Foundation to Flight Sohna Road Gurgaon, Haryana, India

Dr. S A Mohan Krishna, Ph.D.,M.Tech.,B.E, Associate Professor, DEPARTMENT OF INFORMATION SCIENCE AND ENGINEERING, VIDYAVARDHAKA COLLEGE OF ENGINEERING, Mysuru - 570 002, Karnataka, INDIA

GIUSEPPE LANZA, MD., PHD., MSC.,, VIA CONTE RUGGERO, 73 – 94018, TROINA, ITALY

Dr. MIR NASSER HUSSAIN, Ph.D., Professor,Faculty of Mechanical & Industrial Engineering, House No: 30/17, Mehdi Hussain Khan Street, Royapettah Chennai-600 014, Tamil Nadu, India

Prof. Dr. K. Chavan Dattatraya, B.E., DBM., E-MBA., Ph.D., Professor of Mechanical Engineering at MMCOE, Karvenagar, and Pune, India

Dr. S. Rajkumar, B.E., M.E., M.B.A.,M.S.W., Ph.D.,, Dhanalakshmi Srinivasan Engineering College, Perambalur, Tamil Nadu , India

Dr. Umakant V. Kongre, DME., B.E., M.E., Ph.D.,, Associate professor, Department of Mechanical Engineering, Yavatmal, Maharashtra , India

Dr. A. Chennakeshava Reddy, B.E., M.E (mechanical)., M.Tech (CAD/CAM) Ph.D(Production),Ph.D(CAD/CAM), Professor, JNTUH College of Engineering, Hyderabad, India

Prof. Nikhil Dev , B.Tech., M.E., Thermal Engineering (Combined Cycle Power Plant) From University of Delhi, Delhi., India

Dr. P. Govinda Rao, Ph.D, M.Tech., B.E., D.M.E, SSC, Associate Professor, GMR Institute of Technology, Rajam, Andhra Pradesh, India

Dr Muhammad Hafidz Fazli BIN MD FAUADI, B.IT ., M.Eng.,Ph.D .,, Universiti Teknikal Malaysia Melaka (UTeM), Malaysia

Prof. Abhishek Gaikwad, M.Tech, Assistant Professor, Department of Mechanical Engineering, Shepherd school of Engineering and Technology, Sam Higginbottom Institute of Agriculture, Technology & Sciences, Allahabad, Uttar Pradesh, India

Dr. V. VIJAYAN , M.E.,Ph.D, Assistant Professor, K.Ramakrishnan college of Technology, Trichy., India

Prof. Dr. M. Pendleton, Ph.D., Adjunct Assistant Professor, Mechanical Engineering Department, Roy G. Perry College of Engineering P.O. Box 519, MS #2525, Prairie View, Texas, USA

Prof. Dr. Shailendra Kumar Shukla, Ph.D., Associate Professor, Mechanical Engg. Dept., Institute of Technology(I.T.), Banaras Hindu University(B.H.U), Varanasi, India

Dr. Mustafa Ozcanli, Ph.D., Professor, Department of Mechanical Engineering, Cukurova University, Adana, Turkey

Dr. Madhusudhan, B.E., M. Tech., Ph.D., Professor, Nitte Meenakshi Institute of Technology, Yelahanka, Bangalore, Karnataka, India

Prof. Galal Ali Hassaan, M.Sc., Ph.D., Emeritus Professor, Department of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza, Egypt

Dr. Ramachandra C. G , B.E., M. Tech., Ph.D., Professor and Head, Department of Mechanical Engineering (II Shift), Department of Marine Engineering, Srinivas Institute of Technology, Valachila, Mangaluru, Karnataka, India

Mr. Vaghela Rajdipsinh Gajendrasinh, ME., CAD/CAM, Atmiya Institute of Technology & Science, At Rajkot, India

Dr.Md. Abid Ali, M.Tech., Ph.D.,, Professor, Dept. of Mechanical Engineering, K L University,Vijayawada, India

Dr. Nilaj N. Deshmukh , Ph.D, M.Tech. Mechanical,, Associate Professor, Mechanical Engineering Department,Fr.C.Rodrigues Institute of Technology, Vashi,Navi-Mumbai, India

DR. CH V K N S N MOORTHY, Ph.D., & M.Tech (Mechanical Engineering), M.Tech(Computer Science and Engineering), and Professor, Institute of Aeronautical Engineering, Hyderabad, T.S, India

Dr.M.VARATHA VIJAYAN, ME; Ph.D., Professor in Mechanical Engineering, PRINCIPAL, NOVA College of Engineering and Technology, Andhra Pradesh, India

Dr. M. GANESAN, Ph.D.(Mechanical Engineering), M.E.(CAD / CAM), B.E.(Mechanical Engineering), B.E.(Mechanical Engineering), Assistant Professor / Mechanical Engineering in Saranathan College of Engineering, Trichy-12, India

Dr.G. ARUNKUMAR, ME.,Ph.D.,, Professor & Head, Department of Mechanical Engineering, Sathyabama Institute of science and Technology, Jeppiaar Nagar, Chennai, india

Reviewer

Nithesh Naik, Assistant Professor–Senior, Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education (MAHE), Institute of Eminence, Manipal, Karnataka , India

Join Our Editorial Team

Journal is seeking qualified researchers as members of the editorial team. Like our other journals, Journal will serve as a great resource for researchers and students across the globe. We ask you to support this initiative by joining our editorial team. If you are interested in serving as a member of the editorial team.

Editorial Chair Person

Prof. Majid Ghassemi, M.S., Ph.D., Chancellor ,K. N. Toosi University of Technology ,470 Mirdamad Ave. West ,19697, Tehran, I.R. of Iran

Executive Editorial Board Members

Dr. SATHISH.T, Dean, Research and Development, Vesta Research Institute, Aranthangi, Tamilnadu, India

Dr.Woon-HongYeo, M.S.,Ph.D.,(UniversityofWashington), Postdoctoral Research Associate, Rogers Research Group, Materials Science and Engineering, University of Illinois at Urbana-Champaign, Illinois, USA

Prof. Dr. Darshak Desai, B.E., M.Tech., Ph.D., Professor &Head Department of Mechanical Engineering, G H Patel College of Engineering & Technology (GCET),Bakrol Road, Vallabh Vidyanagar, Anand, Gujarat, India

Prof. Dr. B.Venkataraman, M.E., Ph.D., Principal, St. Joseph College of Engineering, Beemanthangal, Sriperumpudur, Kanchipuram, India

Dr. Ashok Kumar Sharma, Professor, Mechanical Engineering, Manipal University Jaipur, India

Prof. Galal Ali Hassaan, B.Sc. (Cairo University), M.Sc. (Cairo University), Ph.D. (Bradford University), Professor (Cairo University), MASME, MAMSE, , Emeritus Professor, Department of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza, Egypt, Egypt

Dr. Ramachandra C G , B.E., M.Tech., Ph.D.,, Professor and HOD for Mechanical Engineering (II Shift) & Marine Engineering in Srinivas Institute of Technology, Mangalore, India

Dr. Sugato Ghosh, M.E., M.B.A., Ph.D., Assistant Professor in Mechanical Department Calcutta institute Technology, West Bengal, India

Editorial Board Members

Dr. Dong W. Jung, PhD, PEng, FCSME, Professor in School of Mechanical Engineering, Jeju National University, Jeju-do, South Korea

Dr. Giuseppe Verde, Student, Department of Engineering, Parthenope University of Naples, Italy

Dr. RAMACHANDRA C. G, Associate Professor, Mechanical Engineering, School of Engineering, Presidency University, Bengaluru, Karnataka, India

Dr. RAVISH KUMAR SRIVASTAVA, Professor & Head, Department of Mechanical Engineering, Subharti College of Engineering and Technology, SWAMI VIVEKANAND SUBHARTI UNIVERSITY, Meerut, Uttar Pradesh, India

Dr. Dhinesh Balasubramanian, Ph.D., Assistant Professor, Department of Mechanical Engineering, Mepco Schlenk Engineering College, Sivakasi, Virudhunagar, Tamil Nadu, India

Dr.S.Mohanamurugan, Ph.D., Professor, Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, OMR, Chennai, Tamil Nadu, India

Dr. Deepika Garg, Ph.D., Assistant Professor, School of Engineering G D GOENKA UNIVERSITY, From Foundation to Flight Sohna Road Gurgaon, Haryana, India

Dr. S A Mohan Krishna, Ph.D.,M.Tech.,B.E, Associate Professor, DEPARTMENT OF INFORMATION SCIENCE AND ENGINEERING, VIDYAVARDHAKA COLLEGE OF ENGINEERING, Mysuru - 570 002, Karnataka, INDIA

GIUSEPPE LANZA, MD., PHD., MSC.,, VIA CONTE RUGGERO, 73 – 94018, TROINA, ITALY

Dr. MIR NASSER HUSSAIN, Ph.D., Professor,Faculty of Mechanical & Industrial Engineering, House No: 30/17, Mehdi Hussain Khan Street, Royapettah Chennai-600 014, Tamil Nadu, India

Prof. Dr. K. Chavan Dattatraya, B.E., DBM., E-MBA., Ph.D., Professor of Mechanical Engineering at MMCOE, Karvenagar, and Pune, India

Dr. S. Rajkumar, B.E., M.E., M.B.A.,M.S.W., Ph.D.,, Dhanalakshmi Srinivasan Engineering College, Perambalur, Tamil Nadu , India

Dr. Umakant V. Kongre, DME., B.E., M.E., Ph.D.,, Associate professor, Department of Mechanical Engineering, Yavatmal, Maharashtra , India

Dr. A. Chennakeshava Reddy, B.E., M.E (mechanical)., M.Tech (CAD/CAM) Ph.D(Production),Ph.D(CAD/CAM), Professor, JNTUH College of Engineering, Hyderabad, India

Prof. Nikhil Dev , B.Tech., M.E., Thermal Engineering (Combined Cycle Power Plant) From University of Delhi, Delhi., India

Dr. P. Govinda Rao, Ph.D, M.Tech., B.E., D.M.E, SSC, Associate Professor, GMR Institute of Technology, Rajam, Andhra Pradesh, India

Dr Muhammad Hafidz Fazli BIN MD FAUADI, B.IT ., M.Eng.,Ph.D .,, Universiti Teknikal Malaysia Melaka (UTeM), Malaysia

Prof. Abhishek Gaikwad, M.Tech, Assistant Professor, Department of Mechanical Engineering, Shepherd school of Engineering and Technology, Sam Higginbottom Institute of Agriculture, Technology & Sciences, Allahabad, Uttar Pradesh, India

Dr. V. VIJAYAN , M.E.,Ph.D, Assistant Professor, K.Ramakrishnan college of Technology, Trichy., India

Prof. Dr. M. Pendleton, Ph.D., Adjunct Assistant Professor, Mechanical Engineering Department, Roy G. Perry College of Engineering P.O. Box 519, MS #2525, Prairie View, Texas, USA

Prof. Dr. Shailendra Kumar Shukla, Ph.D., Associate Professor, Mechanical Engg. Dept., Institute of Technology(I.T.), Banaras Hindu University(B.H.U), Varanasi, India

Dr. Mustafa Ozcanli, Ph.D., Professor, Department of Mechanical Engineering, Cukurova University, Adana, Turkey

Dr. Madhusudhan, B.E., M. Tech., Ph.D., Professor, Nitte Meenakshi Institute of Technology, Yelahanka, Bangalore, Karnataka, India

Prof. Galal Ali Hassaan, M.Sc., Ph.D., Emeritus Professor, Department of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza, Egypt

Dr. Ramachandra C. G , B.E., M. Tech., Ph.D., Professor and Head, Department of Mechanical Engineering (II Shift), Department of Marine Engineering, Srinivas Institute of Technology, Valachila, Mangaluru, Karnataka, India

Mr. Vaghela Rajdipsinh Gajendrasinh, ME., CAD/CAM, Atmiya Institute of Technology & Science, At Rajkot, India

Dr.Md. Abid Ali, M.Tech., Ph.D.,, Professor, Dept. of Mechanical Engineering, K L University,Vijayawada, India

Dr. Nilaj N. Deshmukh , Ph.D, M.Tech. Mechanical,, Associate Professor, Mechanical Engineering Department,Fr.C.Rodrigues Institute of Technology, Vashi,Navi-Mumbai, India

DR. CH V K N S N MOORTHY, Ph.D., & M.Tech (Mechanical Engineering), M.Tech(Computer Science and Engineering), and Professor, Institute of Aeronautical Engineering, Hyderabad, T.S, India

Dr.M.VARATHA VIJAYAN, ME; Ph.D., Professor in Mechanical Engineering, PRINCIPAL, NOVA College of Engineering and Technology, Andhra Pradesh, India

Dr. M. GANESAN, Ph.D.(Mechanical Engineering), M.E.(CAD / CAM), B.E.(Mechanical Engineering), B.E.(Mechanical Engineering), Assistant Professor / Mechanical Engineering in Saranathan College of Engineering, Trichy-12, India

Dr.G. ARUNKUMAR, ME.,Ph.D.,, Professor & Head, Department of Mechanical Engineering, Sathyabama Institute of science and Technology, Jeppiaar Nagar, Chennai, india

Reviewer

Nithesh Naik, Assistant Professor–Senior, Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education (MAHE), Institute of Eminence, Manipal, Karnataka, India

Join Our Editorial Team

Journal is seeking qualified researchers as members of the editorial team. Like our other journals, Journal will serve as a great resource for researchers and students across the globe. We ask you to support this initiative by joining our editorial team. If you are interested in serving as a member of the editorial team.